planetary gear motor 24v wholesale after the operation should be made regular maintenance, generally divided into minor repair, major repair two. Minor repair is a general maintenance, the planetary gear motor 24v wholesale starting equipment and its whole do not make a major disassembly, and the disassembled parts for a comprehensive inspection and cleaning, generally once a year. The temperature rise of the planetary gear motor 24v wholesale should not exceed the allowable limit during normal operation, and the temperature rise of each part should be monitored regularly during operation.

1, monitoring power supply voltage, frequency changes and voltage imbalance caused by the current imbalance, may cause gear brake motor overheating or other abnormal phenomena.

2, often check the bearing heat, oil leakage, regular replacement of lubricating oil. Generally, when replacing lubricating oil, the bearing and bearing cover are cleaned with kerosene, and then washed with gasoline. For rolling bearings, the grease should not exceed 70% of the bearing chamber volume.

3, the winding rotor asynchronous planetary gear motor 24v wholesale, should check the contact between the brush and the collector ring, brush wear and sparks. If the spark is serious, the surface of the collector ring must be cleaned in time, and the brush spring pressure must be corrected.

4, pay attention to keep the internal clean planetary gear motor 24v wholesale, do not allow water droplets, oil and debris fall into the internal planetary gear motor 24v wholesale. planetary gear motor 24v wholesale air intakes and air outtakes must remain unimpeded.

5, pay attention to the smell, vibration and noise of the planetary gear motor 24v wholesale. The windings will give off a burnt insulation smell due to high temperature. Some faults, especially mechanical faults, will soon be reflected as vibration and noise, so when you smell the burnt smell or find abnormal vibration or rubbing sound, large buzzing or other noise, you should immediately power off to check.

6, monitoring gear motor load current. When the planetary gear motor 24v wholesale fails, the stator current increases sharply, causing the planetary gear motor 24v wholesale to overheat. The higher power planetary gear motor 24v wholesale should be equipped with ammeter to monitor the load current of the planetary gear motor 24v wholesale. The load current of the planetary gear motor 24v wholesale should not exceed the rated current value specified on the nameplate, otherwise the cause should be identified, measures should be taken to eliminate the adverse situation before the operation can continue.

planetary gear motor 24v wholesale https://www.dydzmotor.com/32mm-24v-dc-planetary-gear-motor.html